Bottom Duct Assembly - Electrolux EI27MO45GS Installation Instructions Manual

MICROWAVE OVEN INSTALLATION INSTRUCTIONS

BOTTOM dUCT ASSEMBLY

1. Place the bottom duct in the opening and center. when
the Bottom Duct assembly is in the opening correctly, the
flange will be tight against the lower edge of the opening.
See Illustration 2.
Illustration 2
UNIT INSTALLATION
1. Place the oven adjacent to the wall or cabinet opening.
Plug the power cord into the electrical outlet. Carefully
guide the oven into the prepared opening. Slide the oven
on the Bottom Duct assembly. avoid pinching the cord
between the oven and the wall. adjust the position of the
oven so that it will rest on the Bottom Duct assembly, but
not fully pushed in. See Illustration 4.
Illustration 4
2. Secure the Bottom Duct assembly with the two (1 3/16")
screws a. IMPORTANT: Secure screws to the inside
cabinet. See Illustration 3.
SCREw a
2. Locate tabs on the built in trim kit to the slots on control
panel. Snap the built in trim kit into the control panel to
lock in place. See Illustration 5.
SHaPE ON
BOT TOm
E3
SCREw a
Illustration 3
Illustration 5