M6 x 15 Bolt
AA
M6 Flat washer
BB
M6 Lock washer
CC
Step 8 (Install storage basket)
a) Loosen two pre-installed bolts on the door (J) and allow
1/4 bolt's length extend out it.
b) Align the holes on the storage basket (K) with holes on the
door (J).
c)
Tighten all the bolts using the screwdriver provided
GSS2116B
Owner's Manual
4 PCS
4 PCS
4 PCS
Step 9 (Tank clip assembly)
a) Insert the tank clip (U) into the holes on the tank holder.
9
Step 7 (Install door)
b) Insert the pin on the bottom of door (J) into the
pre-drilled hole on the left front frame (F).
c)
Push down the pin on the top of door and insert it into
the pre-drilled hole on left front side of front beam (H).