Paper Shredder Securio B22 - HSM HSM1831 Instruction Manual

9 Technical data
Cutting type
Cut size (mm)
Security level DIN 66399
Cutting capacity* (sheets), A4
Cutting speed
Weight
Intake width
Power supply
Power with max. number of sheets
Energy consumption in standby mode
Operating mode
Ambient conditions in operation:
Temperature
Relative humidity
Height above sea-level (MSL)
Size W x D x H (mm)
Shredded material container volume
Sound pressure level emissions
(Idle running/ load)
* The maximum number of sheets (DIN A4, 70 g/m² or 80 g/m²), fed lengthways, which can be cut in one cycle. The
performance data is determined when the motor is cold and the cutting device is freshly oiled. A weaker mains voltage
or a different mains frequency to the one specifi ed could result in less sheet capacity and increased noise during op-
eration. The sheet capacity can vary depending on the structure and properties of the paper and on the way it enters.
The performance data in 80 g/m² is calculated.
EC Declaration of Conformity
The manufacturer HSM GmbH + Co. KG, Austraße 1 - 9, 88699 Frickingen / Germany hereby declares that the ma-
chine, referred to here as
document shredder Securio B22
corresponds to the health and safety requirements of the following EC directives listed below due to its conception and
design of the version in which it was put into circulation by us:
Low voltage directive 2006 / 95 / EEC
EMC directive 2004 / 108 / EC
Applied standards and technical specifi cations:
• EN 55014-1:2006
• EN 55014-2:1997 + A1:2001 + A2:2008
• EN 61000-3-2:2006 + A1:2009 + A2:2009
• EN 61000-3-3:2008
• EN 62233:2008
• EN 60950-1:2006 + A12:2011
Frickingen, 28.10.2013
ppa. Hubert Kötzinger - Head of Environmental Engineering Product Development
01/2014
Strip cut
5.8
P-2 / O-2 / T-2
E-2
70 g/m 22 - 24
2
80 g/m 17 - 19
2
80 mm/s
11 kg
230 V, 50 Hz
220 V, 60 Hz
• EN 61000-4-2:1995 + A1:1998 + A2:2001
• EN 61000-4-4:2004
• EN 61000-4-5:2006
• EN 61000-4-6:2007 + Corr. Aug. 2007
• EN 61000-4-11:2004
SECURIO B 22
english
3.9 3.9 x 30
P-2 / T-2 / E-2 P-4 / T-4 / E-3
F-1
16 - 18 12 - 14
13 - 15 9 - 11
240 mm
110 V - 120 V, 60 Hz
440 W
< 2 Wh
Continuous operation
-10 °C to +25 °C
max. 90 %, without condensation
max. 2,000 m
375 x 310 x 600
33 l
57 dB(A) / 59 dB(A)
Cross cut
1.9 x 15
P-5 / T-5 / E-4
F-2
9 - 11
7 - 9
90 mm/s
12 kg
100 V, 50 - 60 Hz
17