Caution
•
Risk of explosion! Keep batteries away from heat,
sunshine or fire. Never discard batteries in fire.
•
Use only the supplied batteries.
•
Risk of decreased battery life! Never mix different
brands or types of batteries.
Note
•
Charge the batteries for 8 hours before first use.
•
If the handset becomes warm when the batteries are
being charged, it is normal.
Warning
•
Check the battery polarity when inserting in the
battery compartment. Incorrect polarity may damage
the product.
Configure your phone
(country dependent)
1
When using your phone for the first time,
you see a welcome message.
2
Press MENU/OK.
Set the country/language
Select your country/language, then press
MENU/OK to confirm.
» The country/language setting is saved.
8
EN
Note
•
The country/language setting option is country
dependent. If no welcome message is displayed, it
means the country/language setting is preset for your
country. Then you can set the date and time.
To reset the language, see the following steps.
1
Select MENU/OK > [Phone setup] >
[Language], then press MENU/OK to
confirm.
2
Select a language, then press MENU/OK
to confirm.
» The setting is saved.
Set the date and time
1
Press MENU/OK.
2
Select [Phone setup] > [Date & time],
then press MENU/OK to confirm.
3
Press the numeric buttons to enter the
date, then press MENU/OK to confirm.
» The time setting menu is displayed on
the handset.
4
Press the numeric buttons to enter the
time.
•
If the time is in 12-hour format, press
to select [am] or [pm] (Country
/
dependent).
5
Press MENU/OK to confirm.
Change the remote access
PIN code (for M335)
Note
•
The default answering machine remote access PIN
code is 0000 and it is important to change it to ensure
the security.
1
Press
/
or MENU/OK > [Answ.
Machine].
2
Select [Remote access] > [Change PIN],
then press MENU/OK to confirm.