Table of Contents
Advertisement
Chapter 6
•
Scan:
Usually, the router will automatically detect any newly inserted USB
device. If you find that your USB device is not listed in the USB Storage Device
table, you can click
•
Active:
By default, the newly inserted USB device is accessible to all network
clients, you can click the active icon
from access.
•
Operation:
Click the
you remove the USB device physically.
6. 1. 4.
Customize the Access Settings
By default, all the network clients can access all folders on your USB disk. You can
customize your sharing settings by setting a sharing account, sharing specific contents
and setting a new sharing address on the router's web management page.
1. Visit http://tplinkwifi.net, and log in with the password you set for the router.
2. Go to
Advanced
¾ To Customize the Address of the USB Disk
You can customize the server name and use the name to access your USB disk.
1. In the
Sharing Settings
enter a Network/Media Server Name as you like, such as MyShare, then click Save.
2. Now you can access the USB disk by visiting
MyShare
(for Mac).
¾ To Only Share Specific Content
1. Focus on the
Folder Sharing
sharing folder.
Scan
to refresh the web page with the updated information.
>
USB Sharing
>
Sharing Access
section, make sure
section. Turn off
to hide the corresponding USB device
button to take the USB device offline before
page.
Network Neighborhood
\\MyShare
Share All
, then click
USB Settings
is selected, and
(for Windows) or
smb://
Add
to add a new
28
Advertisement
Table of Contents
