Configuration Commands - Matrix Switch Corporation MSC-XV1664 Product Manual

Command Arguments
DestNames [Dest][Lvl][Label]
E [0 | 1]
Firmware
Help
MascotVer
MtxCfg [0-7]
P [Preset]
PAdd (Preset)(Dest)(Src)[Lvl]
PClr (Preset)
PsetNames [Preset][Label]
PSub (Preset)(Dest)[Lvl]
PView [Preset]
Quit
Reboot
S [1]
SrcNames [Src][Lvl][Label]
SysType
W [Preset]
X [Dest][Src][Lvl]

3.9 Configuration Commands

Commands in this section are for system configuration and are not considered to be a core part of the MASCOT
protocol. There may be implementation and support variations between different system types. Many of these
commands have been superseded by
Command Arguments
DHCP [0 | 1]
FrameIP [IP]
Gateway [IP]
IP [IP]
MAC
MapDest [Dest][Dest][Lvl]
MapSrc [Src][Src][Lvl]
MtxGroup [Number][Number]
NetMask [Netmask]
PairIO [0 | 1]
PanelCmd [Button][Cmd]
PanelCmdEn [0 | 1]
PanelCond [Button][Cond]
PanelDis [0 | 1]
PanelExtEn [0 | 1]
PanelOfs [Dest][Src][Lvl][Lvl]
PanelRate [Number]
SerBaud [Number]
SysName [String]
Page 25 of 60
MSC-XV1664 Product Manual
Description
Destination I/O names command.
Matrix connection echo enable command.
System firmware version.
Command help reference.
Mascot protocol version.
Current matrix config.
Recall a preset.
Add a connection to a preset.
Clear a preset to "No Change" values.
Preset names command.
Subtract a connection from a preset.
View preset.
Quit TCP/IP telnet session.
Reboot the system.
Matrix routing status.
Source names command.
System hardware series.
Store current matrix routing to a preset.
Perform a matrix connect operation.
System Parameters
Description
DHCP enable.
Remote router IP address the panel will control.
Network gateway IP address.
System IP address.
MAC address.
Matrix destination remap command.
Matrix source remap command.
I/O grouping command.
Network mask.
I/O pairing enable. Superseded by the MtxGroup command.
Panel button/GPIO command macros.
Enable panel button/GPIO command macros.
Panel button/GPIO status conditions.
Internal panel button interface disable.
External panel interface enable (if available).
Button panel destination/source offsets and levels to control.
Remote panel refresh rate.
Query or assign serial baud rate.
System name.
© 2013-2018 Matrix Switch Corporation
in Mascot protocol version 3.0.
www.matrixswitch corp.com