Printer Does Not Print - Canon TS705 Online Manual

Printer Does Not Print

Make sure printer is turned on.
Check1
If not, make sure the printer is securely plugged in and press ON button to turn on.
The ON lamp flashes while the printer is initializing. Wait until the ON lamp stops flashing and remains lit.
Note
• If you are printing large data such as photos or other graphics, printing may take longer to start. The ON
lamp flashes while the computer is processing data and sending it to the printer. Wait until printing starts.
Make sure the paper output tray is pulled out fully.
Check2
When you do not use the multi-purpose tray, pull the paper output tray out to the front side until it stops, and then
pull the paper output support out.
Next, press the printer's OK button to resolve the error.
Make sure printer is properly connected to computer.
Check3
If you are using a USB cable, make sure it is securely connected to both the printer and the computer. When the
USB cable is securely plugged in, check the following:
• If you are using a relay device such as a USB hub, disconnect it, connect the printer directly to the
computer, and retry the printing. If printing starts normally, there is a problem with the relay device. Contact
the vendor of the relay device.
• There could also be a problem with the USB cable. Replace the USB cable and retry the printing.
If you use the printer over a LAN, make sure the printer is correctly set up for network use.
Cannot Find Printer while Using Wi-Fi
Cannot Find Printer while Using Wired LAN
Note
• IJ Network Device Setup Utility allows you to diagnose and repair the network status.
356