Installation - Acer G196WL Manual

INSTALLATION

To install the monitor to your host system, please follow the steps as given
below:
Steps
1. 1-1 Connect Video Cable
a. Make sure both the monitor and computer are powered-OFF.
b. Connect the VGA video cable to the computer.
1-2
Connect the digital cable (only for dual-input models).
a. Make sure both the monitor and computer are powered-OFF.
b. Connect one end of the 24-pin DVI cable to the back of the
monitor and connect the other end to the computer's port.
1- 3 Connect one end of the 19-pin HDMI cable to the back of the
monitor and connect the other end to the computer's port
Connect the Audio Cable(Optional)
1- 4
2.
Connect the adapter
a Connect the AC cord to the adapter.
b Connect one end of the adapter to the monitor and the other end to
a properly grounded, AC outlet
3.
Power-ON Monitor and Computer
Power-ON the monitor first, then power-ON the computer.
This sequence is very important.
If the monitor still does not function properly, please refer to the
4.
troubleshooting section to diagnose the problem.
HDMI
.
HDMI
DVI
VGA
DVI
EN-14
DVI D-SUB AUDIO OUT DC-IN
HDMI
DC
AUDIO OUT
D-SUB
(Optional) .
DC-IN