Table of Contents
Advertisement
Installation
1.
Turn off your computer and unplug your computer's power cord.
2.
Connect the signal cable to the VGA and /or HDMI (optional) and /or DP (optional) input socket of the monitor, and
the VGA and /or HDMI (optional) and /or DP (optional) output socket of the graphics card on the computer. Then
tighten the thumbscrews on the signal cable connector.
3.
ptional: Connect the audio input socket (AUDIO IN) of the LCD monitor and the line-out port on the computer with
the audio cable.
4.
Insert the monitor power cable into the power port at the back of the monitor.
5.
Connect the power adapter and power cord to the monitor, then to a properly grounded AC outlet.
Note: Audio output is only for audio output model. Please check user manual for more instruction.
Advertisement
Table of Contents
