Frequently Asked Questions - Samsung P Series User Manual

Chapter 6. Troubleshooting
When booting the PC with the input source set to
DisplayPort, the BIOS and booting screens do not appear.

Frequently asked questions

Refer to the user manual for your PC or graphics card for further instructions on adjustment.
Question
How can I change the frequency?
How can I change the resolution?
How do I set power saving mode?
Boot the PC when the set is turned on or when the input source is not DisplayPort.
Answer
Set the frequency on your graphics card.
• Windows 7: Go to Control Panel → Appearance and Personalization
Settings → Monitor and adjust the frequency in
• Windows 8: Go to Settings → Control Panel
Advanced Settings → Monitor and adjust the frequency in
• Windows 10: Go to Settings → System
Monitor, and adjust Screen refresh rate
• Windows 7: Go to Control Panel → Appearance and Personalization
resolution.
• Windows 8: Go to Settings → Control Panel
and adjust the resolution.
• Windows 10: Go to Settings → System
• Windows 7: Set power saving mode in
Screen Saver → Change power settings
• Windows 8: Set power saving mode in
→ Screen Saver Settings or BIOS SETUP on the PC.
• Windows 10: Set power saving mode in
Power & sleep or BIOS SETUP on the PC.
→ Display
Monitor Settings.
→ Appearance and Personalization
Monitor Settings.
→ Display → Advanced display settings
under Monitor settings.
→ Display
→ Appearance and Personalization
→ Display → Advanced display settings, and adjust the resolution.
Control Panel → Appearance and Personalization
or BIOS SETUP on the PC.
Settings → Control Panel → Appearance and Personalization
Settings → Personalization → Lock screen
82
→ Adjust resolution → Advanced
→ Display → Adjust resolution →
→ Display adapter properties →
→ Adjust Resolution and adjust the
→ Display → Adjust Resolution
→ Personalization →
→ Personalize
→ Screen timeout settings →