Samsung P Series User Manual page 56

Chapter 5. Menu
Picture ▼
2nd 3rd
Analog Clean View
HDMI Black Level
Film Mode
Dynamic Backlight
Picture Size Picture Size
Fit to Screen
Zoom/Position
Auto Adjustment
PC Screen Adjustment C oarse / Fine
Position
Description
Reduce diagonal noise in picture caused by the crosstalk of signals.
Selects the black level on the screen to adjust the screen depth.
This mode is suitable to view movies.
Sets the product to automatically sense and process film signals from all sources and adjust the picture for
optimum quality.
• Available in TV, HDMI (1080i).
Automatically adjust the backlight to provide the best possible screen contrast under the current conditions.
Different screen adjustment options are displayed depending on the current input source.
CAUTION
Do not set your product to 4:3 format for a long time.
The borders displayed on the left and right, or top and bottom of the screen may cause image retention (screen
burn) which is not covered by the warranty.
When selected, the full programme image will be displayed. No part of the image will be cut off.
Adjusts the picture zoom and position.
• C ustom under Picture Size is only enabled when
• If you want to reset the picture to its original position, select
The picture will be set to its default position.
Adjust frequency values/positions and fine tune the settings automatically.
Removes or reduces picture noise.
If the noise is not removed by Fine-tuning alone, use the Coarse function to adjust the frequency as best as possible
(Coarse) and Fine-tune again. After the noise has been reduced, re-adjust the picture so that it is aligned with the
center of screen.
To adjust the PC's screen position if it is not centreed or does not fit the product screen.
Press the  or  button to adjust the vertical position. Press the  or  button to adjust the horizontal position.
P icture Size must be set to Custom for the option to be available.
Picture Mode is set to Video/Image
Reset in the Zoom/Position
56
while in DVI mode.
screen.