Samsung P Series User Manual page 28

Chapter 2. Device setup
Setting PIP on/off (Set the PIP ON/OFF)
Header Command ID
0xAA 0x3C
"PIP": A code used to turn the PIP mode of a product on or off
• 1: PIP ON
• 0: PIP OFF
Ack
Header Command ID Data
length
0xAA 0xFF 3
"PIP": A code used to turn the PIP mode of a product on or off
Nak
Header Command ID Data
length
0xAA 0xFF 3
"ERR" : A code showing what error has occurred.
Auto adjustment control (PC and BNC only)
Function
• Automatically adjust the PC system screen using a PC.
Viewing auto adjustment state (Get Auto Adjustment Status)
• None
Data Data Checksum
length
1 "PIP"
Ack / r-CMD Val1 Checksum
Nak
' A ' 0x3C "PIP"
Ack / r-CMD Val1 Checksum
Nak
'N' 0x3C "ERR"
Setting auto adjustment (Set Auto Adjustment)
Header Command ID
0xAA 0x3D
"Auto Adjustment": 0x00 (at all times)
Ack
Header Command ID Data
length
0xAA 0xFF 3
Nak
Header Command ID Data
length
0xAA 0xFF 3
"ERR" : A code showing what error has occurred.
Video Wall Mode Control
Function
• V ideo Wall mode can be activated on a product using a PC.
• This control is only available on a product whose
Viewing video wall mode (Get Video Wall Mode)
Header Command
0xAA 0x5C
Data Data Checksum
length
1 "Auto
Adjustment"
Ack / r-CMD Val1 Checksum
Nak
' A ' 0x3D "Auto
Adjustment"
Ack / r-CMD Val1 Checksum
Nak
'N' 0x3D "ERR"
Video Wall is enabled.
ID Data length Checksum
0
28