Table of Contents
Advertisement
5-2-17-2 Device Hardware Configuration menu
Parameter
Main Configuration Page
> Device Hardware
Configuration Menu
DCB Protocol
Number of VFs per PF
Max PF MSI-X Vectors
UEFI Boot Mode
MFW Crash Dump Feature
Description
Enable/Disable the DCB Protocol.
Options available: Enabled/Disabled. Default setting is Enabled
Press [Enter] to configure device and port specific parameters.
Displays the maximum number of PF MSI-X Vectors. (0 to 64).
Specifies Driver Boot Mode in UEFI environment.
Default setting is UNDI.
Enables MFW bootcode to collect critical device and system information
during unanticipated system crash.
Options available: Enabled/Disabled. Default setting is Enabled.
- 45 -
BIOS Setup
Advertisement
Table of Contents
