Table of Contents
Advertisement
Parameter
Main Configuration Page
Firmware Image Menu
Device Hardware
Configuration Menu
MBA Configuration Menu
iSCSI Boot Configuration
Menu
Multi-Function Mode
Blink LEDs
Chip Type
PCI Device ID
Bus: Device: Function
Link Status
Parameter MAC Address
Virtual MAC Address
Description
Press [Enter] to view device firmware version information.
Press [Enter] to configure device and port specific parameters.
Press [Enter] to configure Multiple Boot Agent (MBA) parameters.
Press [Enter] to configure iSCSI boot parameters.
Virtualization mode configuration. System must be rebooted in order for
changes to take effect.
Options available: SF/SR-IOV. Default setting is SF.
Identifies the physical network port by blinking the associated LED.
Press the numeric keys to adjust desired values.
Displays the technical specifications for the Network Interface Controller.
Displays the technical specifications for the Network Interface Controller.
Displays the bus number, device number, and function number.
Displays the technical specifications for the Network Interface Controller.
Displays the Permanent MAC Address.
Displays the Virtual MAC Address.
- 45 -
BIOS Setup
Advertisement
Table of Contents
