Changing Basic Settings; Home Connect - Siemens SN95ZX61CG User Manual

Basic setting
Childproof lock
Wi-Fi
Remote Start
Factory setting
1
Factory setting (may vary according to model)

Changing basic settings

Open the appliance door.
1.
Press ⁠ .
2.
To open the basic settings, press
3.
for 3 seconds.
a The display shows H:xx.
a The display shows
Press
4.
the display shows the required set-
ting.
Press or
5.
display shows the right value.
You can change several settings.
To save the settings, press
6.
for 3 seconds.
Close the appliance door.
7.
Display text
1
c:00
1
Cn:00
1
rc:01
rE:
⁠ .
repeatedly until
repeatedly until the
Selection
c:00 - c:01
Cn:00 - Cn:01
rc:00 - rc:02
Start with
Y:ES
Confirm with
Home Connect
Home Connect
This appliance is network-capable.
Home Connect
Connect your appliance to a mobile
device to control its functions via the
Home Connect app.
The Home Connect services are not
available in every country. The avail-
ability of the Home Connect function
depends on the availability of
Home Connect services in your coun-
try. You can find information about
this at: www.home-connect.com.
Home Connect en
Description
Switch the
→ "Electric childproof lock",
Page 11 on or off.
Level "c:00" switches the childproof
lock off.
Switch the wireless network connec-
tion on or off.
Level "Cn:00" switches the wireless
network connection off.
Activate or deactivate
→ "Remote Start
The following settings are possible:
¡ With the setting "rc:00", the func-
tion is permanently deactivated.
¡ With the setting "rc:01", the func-
tion can be selected via the
button.
→ "Activating Remote Start
Page 41
¡ With the setting "rc:02", the func-
tion is permanently activated.
Restore changed settings to the fact-
ory settings.
The settings for initial start-up must
be configured.
", Page 40.
",
39