Darning - Brother JA1450NT Operation Manual

— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —

Darning

Stitch Name
Straight Stitch
(Center Needle
Position)
Straight Stitch
(Center Needle
Position)
Straight Stitch
(Center Needle
Position)
Straight Stitch
(Center Needle
Position)
Straight Stitch
(Center Needle
Position)
Straight Stitch
(Left Needle
Position)
Turn off the machine.
1
Place the darning plate on the needle
plate, then turn on the machine.
Either remove both the presser foot and
2
presser foot holder assembly and then
lower the presser foot lever.
Put the section you want to darn under
3
the presser foot together with fabric for
reinforcement.
Turn on the machine.
4
CAUTION
●
Do not turn on the machine while pressing
down the foot controller. The machine
may start unexpectedly and cause
personal injury or damage to the machine.
Stitch
Pattern Length
[mm (inch)]
6
Darning
1.6 (1/16)
7
Darning
1.8 (1/8)
8
Darning
2 (1/16)
9
Darning
3 (1/8)
10
Darning
4 (3/16)
11
Darning
2.5 (3/32)
Begin sewing by alternating between
5
gently drawing the work away from you
and pulling it toward you.
Other
● Sew while holding the fabric stretched in
order to keep the fabric held down.
Plate
Repeat this motion until the section being
6
darned is filled with parallel lines of
stitching.
Plate
Plate
Plate
Plate
Plate
Note
5
38