Table of Contents
Advertisement
Changing the programme
If you have started the wrong
programme by mistake, you can
change the programme as follows:
Press the Ü button.
1.
Select another programme.
2.
Press the Ü button. The new
3.
programme starts from the
beginning.
When switching from
Note:
programmes that use active oxygen to
those that do not, the door will remain
locked for up to 25 minutes until there
is no longer any active oxygen in the
drum.
The Ï and î symbols will flash. If the
symbols are off, the door can be
opened.
Cancel the programme
For programmes at high temperatures:
Press the Ü button.
1.
To cool down laundry: Select Rinse.
2.
Press the Ü button.
3.
For programmes at low temperatures:
Press the Ü button.
1.
Select Spin or Empty.
2.
Press the Ü button.
3.
When cancelling programmes
Note:
that use active oxygen, the door will
remain locked for up to 25 minutes until
there is no longer any active oxygen in
the drum.
Switch the appliance on again if
necessary. The Ï and î symbols will
flash. If the symbols are off, the door
can be opened.
Operating the appliance
Programme end during rinse
hold
In the display panel, $ flashes, and the
preset spin speed and remaining
programme length are displayed for the
selected programme.
Continue the programme by:
Pressing the Ü button or
■
Changing the spin speed, or setting
■
the programme selector to Empty
and then pressing the Ü button.
Programme end
- 0 - and Ï appear in the display panel.
The Ü button indicator lamp is off.
en
41
Advertisement
Table of Contents
