New Holland D180C Tier 4 Service Manual page 32

Prod- Color Strength
uct
638 Green 13.5 - 25.0 MPa
(1958 -
3626 psi)
648 Green 13.5 - 25.0 MPa
(1958 -
3626 psi)
660 Metallic 17.2 MPa
grey (2495 psi)
680 Green 19.3 - 24.1 MPa
(2799 -
3496 psi)
Product
Color
5699 1.3 - 2.1 MPa
Grey
(189 - 305 psi)
587 Blue NA
593 Black 1.5 MPa
(218 psi)
Retain, Cylindrical Assemblies
Fixture/Full
Cure (Steel/
Steel) Time
4 min/6 hrs
4 min/1.5 hrs
15 min/1.5 hrs 7471 or
20 min/1.1 hrs 7471 or
Strength Fixture/Full
Cure (Steel/
Steel) Time
30 min/14 days
2 hrs/24 hrs
5 min/24 hrs
INTRODUCTION
Recom-
mended
Primer or
Activator
7471 or Is designed for the bonding of cylindrical fitting
7469 parts, particularly where bond gaps can approach
0.25 mm (0.01 in.) and where maximum strength
at room temperature is required. The product
cures when confined in the absence of air between
close fitting metal surfaces and prevents loosening
and leakage from shock and vibration. Typical
applications include locking bushings and sleeves
into housings and on shafts.
7471 or Is designed for the bonding of cylindrical fitting
7469 parts. The product cures when confined in the
absence of air between close fitting metal surfaces
and prevents loosening and leakage from shock
and vibration. Typical applications include holding
gears and sprockets onto gearbox shafts and rotors
on electric motor shafts.
Is designed for the bonding of cylindrical fitting
7469
parts, particularly where bond gaps can approach
0.50 mm (0.02 in). The product cures when
confined in the absence of air between close
fitting metal surfaces and prevents loosening and
leakage from shock and vibration. This product
possesses excellent gap cure characteristics.
Typical applications include restoring correct fits
on worn shafts, spun bearings, and damaged
keyways.
Is designed for the bonding of cylindrical fitting
7469 parts, particularly where low viscosity is required.
The product cures when confined in the absence
of air between close fitting metal surfaces and
prevents loosening and leakage from shock and
vibration.
RTV Sealants
Is designed primarily for flange sealing with excellent
oil resistance on rigid flange sealing for example on
transmissions and cast metal housings.
Forms tough, flexible gaskets directly on the flange.
Sensor-safe, low odor, non-corrosive. Excellent oil
resistance and joint movement values. Eight times more
flexible than cork/composite gaskets; three times more
oil resistant than conventional silicones. Temperature
range -59 - 260 °C (-75 - 500 °F) intermittent; resists
auto and shop fluids.
Is designed for superior bonding and sealing properties
to most surfaces (not recommended for concrete). This
product resists aging, weathering and thermal cycling
without hardening, shrinking or cracking. It is formulated
to withstand extreme temperature cycling, UV light and
ozone. The thixotropic nature reduces the migration of
liquid product after application to the substrate.
47645621 31/05/2014
27
Description
Description