Table of Contents
Advertisement
Step 8:
Step 9:
Step 10:
Step 11:
2-4:Create a"RAID Ready" System into" RAID 10" with three Hard Drives by'Create RAID Volume
from Existing HDD Drive '.
Step 1:
Step 2:
Step 3:
Step 4:
Step 5:
Step 6:
At least select two HDD as Menber Hard Drive(s).
Specify Volume Size then press "next".
Press "next" to finish setup and start create RAID5.
It may takes half and hours to create RAID5.After create completely,it will ask to
reboot to finish create RAID5.
Install Vista OS with one SATA HDD.
Shut down the system,then add other two serial ATA hard drives in the system.
Boot to OS desktop, open the Intel® Matrix Storage Console.
Click on the by'Create RAID Volume from Existing HDD Drive ' to create a RAID
Click "Next" at create a RAID volume window.
Key the name in "Volume Name" and select "RAID 10" in RAID Level.
Picture13
Hide quick links:
Advertisement
Table of Contents
