New Holland D150C Tier 2 Service Manual page 46

Product Color
595 Clear 1.5 MPa
(218 psi)
596 Red NA
Prod-
Color Strength
uct
509 Blue to 8 - 9 MPa (1160
green- - 1305 psi)
ish
paste
515
Opaq- 6 - 14 MPa (870
ue, dark - 2031 psi)
purple
518 Red 7.5 - 8.5 MPa
(1088 -
1233 psi)
542 Brown 9 - 25 Nm (80 -
222 lb in)
545 Purple 2 Nm (20 lb in) 30 min/24 hrs
567 Off 0.3 - 1.7 Nm (3
white - 15 lb in)
569 Brown 1.1 - 2.8 Nm
(10 - 25 lb in)
Strength Fixture/Full
Cure (Steel/
Steel) Time
5 min/24 hrs
5 min/24 hrs
Gasket Sealants
Fixture/Full
Cure (Steel/
Steel) Time
1 hr/72 hrs
30 min/18 hrs
30 min/8 hrs
20 min/8 hrs
4 hrs/72 hrs
2 hr/24 hrs
INTRODUCTION
RTV Sealants
Is designed for superior bonding and sealing properties
to most surfaces (not recommended for concrete). This
product resists aging, weathering and thermal cycling
without hardening, shrinking or cracking. It is formulated
to withstand extreme temperature cycling, UV light and
ozone. The thixotropic nature reduces the migration of
liquid product after application to the substrate.
Is specifically formulated for gasketing and sealing where
high temperatures 315 °C (600 °F) are experienced such
as exhaust manifolds - crossovers, high temperature
ovens and furnaces. Applications where sealing and
bonding are required under frequent exposure to
temperatures above 235 - 315 °C (450 - 600 °F).
Recom-
mended
Primer or
Activator
7471 or Provides resistance to low pressures immediately
7469 after assembly of flanges. It seals close fitting joints
between rigid metal faces and flanges. Typically
used as a form-in-place gasket on rigid flanged
connections, e.g. gearbox and engine casings, etc.
The thixotropic nature reduces the migration of
liquid product after application to the substrate.
7471 or
It seals close fitting joints between rigid metal
7469 faces and flanges and will flex with minor flange
movements. Provides resistance to low pressures
immediately after assembly of flanges. Typically
used as a form-in-place gasket for pumps,
thermostats, compressors, transmission housings
and axle covers.
7471 or Typical applications include sealing close fitting
7469 joints between rigid metal faces and flanges.
Provides resistance to low pressures immediately
after assembly of flanges. Typically used as a
form-in-place gasket on rigid flanged connections,
e.g. gearbox and engine casings, etc.
7471 or Is designed for the locking and sealing of metal
7469
pipes and fittings. The product cures when confined
in the absence of air between close fitting metal
surfaces and prevents loosening and leakage from
shock and vibration.
7471 or Is designed for the locking and sealing of metal
7469 pipes and fittings. The product cures when confined
in the absence of air between close fitting metal
surfaces and prevents loosening and leakage
from shock and vibration. This product is specially
formulated to offer lubricity for easy assembly.
7471 or Is designed for the locking and sealing of metal
7469 tapered threads and fittings.
7471 or Is designed for the locking and sealing of plastic
7469 and metal pipes and fittings.
47907877 06/10/2015
37
Description
Description