Transportation And Storage; Transporting Lithium Batteries; Maintenance - Ryobi ONE+ OLT1833-0 Original Instructions Manual

Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 3
Secure long hair so it is above shoulder
level to prevent entanglement in moving
parts.
The small blade fitted to the safety guard
is designed to trim the new extended line
to the correct length for safe and optimum
performance. It is very sharp, do not touch
it particularly when cleaning the product.
Always ensure that ventilation openings
are kept clear of debris.
Before use and after any impact, check that
there are no damaged parts. A defective
switch or any part that is damaged should
be properly repaired or replaced by an
authorised service centre.
Make sure the cutting head attachment is
properly installed and securely fastened.
Make sure all guards, deflectors, and
handles are properly and securely attached.
Do not modify the product in any way, this
may increase the risk of injury to yourself
or others.
Use only the manufacturer's replacement
cutting line. Do not use any other cutting
attachment.
Immediately switch off and remove the
battery pack in the event of accident or
breakdown. Do not operate the product
again until it has been fully checked by an
authorised service centre.
ADDITIONAL BATTERY SAFETY
WARNINGS
WARNING
To reduce the risk of fi re, personal injury,
and product damage due to a short circuit,
never immerse your tool, battery pack or
charger in fl uid or allow a fl uid to fl ow inside
them. Corrosive or conductive fl uids, such
as seawater, certain industrial chemicals,
and bleach or bleach-containing products,
etc., can cause a short circuit.
WARNING
Ensure that the line cut-off blade in guard
is properly positioned and secured before
each use.

TRANSPORTATION AND STORAGE

Stop the product, remove the battery pack,
and allow it to cool down before storing or
transporting.
Clean all foreign material from the product.
Do not store or transport the product
with batteries fitted, remove and secure
separately. Store the product in a cool,
dry, and well-ventilated place that is
inaccessible to children. Keep away
from corrosive agents, such as garden
chemicals and de-icing salts. Do not store
outdoors.
For transportation in vehicles, secure the
product against movement or falling to
prevent injury to persons or damage to the
product.

TRANSPORTING LITHIUM BATTERIES

Transport the battery in accordance with local
and national provisions and regulations.
Follow all special requirements on packaging
and labelling when transporting batteries by a
third party. Ensure that no batteries can come
in contact with other batteries or conductive
materials while in transport by protecting
exposed connectors with insulating, non-
conductive caps or tape. Do not transport
batteries that are cracked or leaking. Check
with the forwarding company for further
advice.

MAINTENANCE

WARNING
Use
only
original
replacement
parts,
attachments.
Failure
cause possible injury, contribute to poor
performance, and may void your warranty.
manufacturer's
accessories,
and
to
do
so
can
English |
3
EN
FR
DE
ES
IT
NL
PT
DA
SV
FI
NO
RU
PL
CS
HU
RO
LV
LT
ET
HR
SL
SK
BG
UK
TR

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

One+ olt1833One+ olt1832

Table of Contents