Table of Contents
Advertisement
g
h
2.
Press the
or
button.
The stored settings are displayed.
n
Press the
button.
3.
The memory function starts. The
in the display.
Note: Once operation has started, you can no longer change
the memory location.
Note: The programmes which have been set remain stored
even if there is a power cut.
Changing the basic settings
Your appliance has various basic settings which you can
change at any time.
Basic settings
In the table, you will find all the basic settings and options for
changing them.
Basic setting
™‚
Clock display
‚
= on
™ƒ
Signal duration
ƒ
= medium = 2 minutes
™„
Button tone
‚
= on
™...
Waiting time
ƒ
= medium = 5 seconds
Prerequisite: your appliance is switched off.
0
Press and hold the
button for a few seconds.
1.
The first basic setting appears in the display.
You can change the basic setting by turning the rotary
2.
selector.
Care and cleaning
With careful care and cleaning your microwave oven will retain
its looks and remain good order. We will explain here how you
should care for and clean your appliance correctly.
Risk of electric shock.!
Penetrating moisture may cause an electric shock. Do not use
any high-pressure cleaners or steam cleaners.
Risk of burns!
Never clean the appliance immediately after switching off. Let
the appliance cool down.
Risk of injury!
Scratched glass in the appliance door may develop into a
crack. Do not use a glass scraper, or sharp or abrasive
cleaning aids or detergents.
Notes
Slight differences in colour on the front of the appliance are
■
caused by the use of different materials, such as glass,
plastic and metal.
27
r
cooking time counts down
Options
Clock display
ƒ
= off
‚
= short = 10 seconds
„
= long = 5 minutes
Button tone
ƒ
= off
‚
= short = 2 seconds
„
= long = 10 seconds
The cooking time has elapsed.
An audible signal sounds. The memory function has finished.
Use the
%
button to switch off the appliance or make new
settings. You can stop the audible signal by pressing the
button.
Pausing
Briefly press the
n
button or open the appliance door.
Operation is suspended.
After closing the door, press the
continue.
Explanation
Displays the clock
Audible signal after the cooking time has
elapsed
Confirmation tone when a button is pressed
Waiting time between two separate steps,
after setting
Confirm by pressing the
3.
The next basic setting appears in the display. You can go
through all of the basic settings with the
changes with the rotary selector.
To finish, press and hold the
4.
All settings are applied.
You can change the settings at any time.
Shadows on the door panel which look like streaks, are
■
caused by reflections made by the oven light.
Enamel is baked on at very high temperatures. This can
■
cause some slight colour variations. This is normal and does
not affect their function. The edges of thin trays cannot be
completely enamelled. As a result, these edges can be
rough. This will not impair the anti-corrosion protection.
Unpleasant odours, e.g. after fish has been prepared, can be
■
removed very easily. Add a few drops of lemon juice to a cup
of water. Place a spoon into the container as well, to prevent
delayed boiling. Heat the water for 1 to 2 minutes at
maximum microwave power.
Cleaning agents
To ensure that the different surfaces are not damaged by using
the wrong cleaning agent, observe the information in the table.
Do not use
sharp or abrasive cleaning agents,
■
metal or glass scrapers to clean the glass in the appliance
■
door,
n
button. Operation will then
0
button.
0
button and make
0
button for a few seconds.
0
Advertisement
Chapters
Table of Contents
