Acer TravelMate 8371 Series Service Manual page 44

The table below describes the parameters in this screen. Settings in boldface are the default and suggested
parameter settings.
Parameter
System Time
System Date
System Memory
Total Memory
Video Memor
Quiet Boot
Network Boot
F12 Boot Menu
D2D Recovery
SATA Mode
NOTE: The sub-items under each device will not be shown if the device control is set to disable or auto. This is
because the user is not allowed to control the settings in these cases.
36
Description
Sets the system time. The hours are
displayed with 24-hour format.
Sets the system date.
This field reports the memory size of the
system.
This field reports the memory size of total
memory in the system.
Shows the Video memory size.
Determines if Customer Logo will be
displayed or not; shows Summary Screen
is disabled or enabled.
Enabled: Customer Logo is displayed, and
Summary Screen is disabled.
Disabled: Customer Logo is not displayed,
and Summary Screen is enabled.
Enables, disables the system boot from
LAN (remote server).
Enables, disables Boot Menu during
POST.
Enables, disables D2D Recovery function.
The function allows the user to create a
hidden partition on hard disc drive to store
operation system and restore the system
to factory defaults.
Choose which mode of HDD mode. Please
be careful for changing this setting
because it might cause system fail to boot.
Format/Option
Format: HH:MM:SS
(hour:minute:second)
System Time
Format: MM/DD/YYYY
(month/day/year)
System Date
Option: Enabled or
Disabled
Option: Enabled or
Disabled
Option: Disabled or
Enabled
Option: Enabled or
Disabled
Option: AHCI Mode or IDE
Mode
Chapter 2