Download Print this page

Kohler Numi+ K-3900T-2-0 Installation Manual page 6

Intelligent toilet

Advertisement

1-1/4" (3.2 cm) D.
Power Supply Hole
1-1/2" (3.8 cm) D.
Water Supply Hole
1-3/4"
(4.4 cm),
1-1/2"
(3.8 cm)
Min
36-1/4"
(92 cm)
Roughing-in - Through-the-Floor Water and Electrical
NOTICE: The locations for the supply shut-off, electrical outlet, and docking station cord are suggested
locations. Make sure all installations adhere to applicable codes and standards.
IMPORTANT! Do not install any items behind the toilet that will interfere with the lid when it is raised.
All decorative items should be at least 37 " (94 cm) high to allow clearance for the seat.
The remote docking station is equipped with a 16' (5 m) power cord.
The supplied power cord is 56 " (142 cm) in length.
The toilet is equipped with a motion sensor to automatically open the seat when movement is
sensed. Sensitivity can be adjusted using the User Interface.
The toilet is equipped with a motion sensor ring actuator, located on the right side of the toilet. This
sensor has a maximum range of 20 cm. Keep this area free of obstructions.
1/2 " OD compression supply stop outlet is required unless an adapter is used.
1195109-T01-F
29-1/2" (74.9 cm)
3-15/16" (10 cm)
25-3/4" (65.4 cm)
38" (96.5 cm) - 66" (167.6 cm)
5-15/16"
(15.1 cm)
4-1/16"
(10.4 cm)
12"
C L Of Outlet
(30.5 cm)
14-1/2"
(36.8 cm)
Remote Dock
41" (104.1 cm) -
66" (167.6 cm)
2-1/4"
(5.7 cm)
15-5/8"
(39.7 cm)
6
Front of Bowl
10-13/16" (27.5 cm)
2-5/8"
(6.7 cm) D.
12"
(30.5 cm)
Finished Wall
17-7/8"
(45.4 cm)
25-1/4"
(64.1 cm)
Kohler Co.

Advertisement

loading

This manual is also suitable for:

Numi k-3900t-2