Table of Contents
Advertisement
Wireless box/receiver
•
Power supply: 110-240 V~, 50-60 Hz
•
Power consumption: 20 W
•
Standby power consumption: ≤ 0.5 W
•
Dimensions (W x H x D):
150 x 44.5 x 126 mm;
•
Weight: 0.4 kg
Remote control batteries
•
1 x AAA-R03-1.5 V
Standby power management
•
When the product remains inactive for
15 minutes, it automatically switches to
standby or networked standby.
•
The power consumption in standby or
networked standby is less than 0.5W.
•
To deactivate Bluetooth connection, press
and hold the Bluetooth button on the
remote control.
•
To activate Bluetooth connection, enable
Bluetooth connection on your Bluetooth
device, or enable Bluetooth connection via
the NFC tag (if available).
8 Troubleshooting
Warning
•
Risk of electric shock. Never remove the casing of the
product.
To keep the warranty valid, never try to repair
the product yourself.
If you have problems using this product, check
the following points before you request service.
If you still have a problem, get support at
www.philips.com/support.
Main unit
The buttons on this product do not work.
•
Disconnect this product from the power
supply for a few minutes, then reconnect.
Sound
No sound from the speakers of this product.
•
Connect the audio cable from this product
to your TV or other devices. However, you
do not need a separate audio connection
when:
•
the product and TV are connected
through HDMI ARC connection, or
a device is connected to the HDMI IN
•
connector on this product.
•
Reset this product to its factory settings.
•
On the remote control, select the correct
audio input.
•
Make sure that this product is not muted.
No sound from the wireless subwoofer.
•
Wirelessly connect the subwoofer to the
main unit.
No sound from the rear speakers.
•
Set up the rear speakers, and connect the
rear speakers to the main unit wirelessly.
Distorted sound or echo.
•
If you play audio from the TV through this
product, make sure that the TV is muted.
EN
17
Advertisement
Table of Contents
