Set Up Speakers - Philips CSS5330B/12 User Manual

Note
•
When this product and TV are connected through
HDMI ARC, an audio connection is not required.
Option 1: Connect audio through a
digital optical cable
Best quality audio
1
Using an optical cable, connect the
OPTICAL IN connector on this product
to the OPTICAL OUT connector on the
TV or other device.
• The digital optical connector might be
labeled SPDIF or SPDIF OUT.
Option 2: Connect audio through
analog audio cables
Basic quality audio
AUDIO OUT
1
Using an analog cable, connect the AUDIO
IN (3.5mm jack) on this product to the
AUDIO OUT connectors (red and white)
on the TV or other device.
2
Press AUX on the remote control to
switch to AUX mode.
TV
L R

Set up speakers

Set up the speakers manually to experience
customized surround sound.
Before you start
Make the necessary connections described in
the quick start guide.
Set up speaker distance
Wireless connection causes audio delay latency.
Set up the speaker distance to synchronize
audio output among the front speakers and
subwoofer.
1
Press DELAY to enter setup mode.
» The display panel scrolls DELAY ADJ
(delay adjustment).
To exit setup mode, press EXIT
•
SETTINGS, or 3 seconds of button
inactivity occurs.
2
Press DELAY again to select a speaker for
distance adjustment.
3
Press Volume +/- to adjust distance for the
selected speaker.
• To exit setup mode without save, press
EXIT SETTINGS, or 3 seconds of
button inactivity occurs.
4
Repeat step 2 and 3 to set up the distance
for other speakers.
5
After the setup is complete, press EXIT
SETTINGS to exit.
» The value is saved and applied.
Set up speaker volume
Set up the speaker volume for optimal
surround sound.
1
Press VOL to enter setup mode.
» The display panel scrolls SPKR VOL
(speaker volume).
To exit setup mode, press EXIT
•
SETTINGS, or 3 seconds of button
inactivity occurs.
EN
9