Table of Contents
Advertisement
2
Press VOL again to play test tone from the
speakers.
3
Then press VOL to select a speaker for
volume adjustment.
4
Press Volume +/- to adjust volume for the
selected speaker.
•
To exit setup mode without save, press
EXIT SETTINGS, or 3 seconds of
button inactivity occurs.
5
Repeat step 3 and 4 to set up the volume
for other speakers.
6
After the setup is complete, press EXIT
SETTINGS to exit.
» The value is saved and applied.
EN
10
4 Use your
product
This section helps you use this product to play
audio from connected devices.
Before you start
•
Make the necessary connections described
in the quick start guide and the user
manual.
•
Switch this product to the correct source
for other devices.
Adjust the volume
1
Press Volume +/- to increase or decrease a
volume level.
•
To mute sound, press
•
To restore the sound, press
press Volume +/-.
Choose your sound
This section helps you choose the ideal sound
for your video or music.
Sound mode
Select predefined sound modes to suit your
video or music.
1
Press SOUND to select a sound option
from the display panel.
AUTO: Automatically select a sound
•
setting based on the sound stream.
STEREO: Create stereo sound.
•
VSURR: Create virtual surround effect.
•
•
3CH: Create 3.1 channel surround.
.
again or
Advertisement
Table of Contents
