Recycling And Disposal; European En Iso 9241-307 Class Ii Standard - Medion Akoya P6685 Instruction Manual

Table of Contents

23. Recycling and Disposal

Should you have any questions concerning the disposal please contact your dealer

or customer service.

Packaging

Your device has been packaged to protect it against transportation

damage. Packaging is raw material and can be re-used or added to the

recycling system.

Device

The device is fitted with an integrated battery. At the end of its

operating life, do not dispose of the device with your ordinary

household trash. Consult your local authority to find out about

collection centres for environmentally sound disposal of electrical and

electronic scrap.

Due to the very high number of transistors and the associated extremely complex

manufacturing processes used, occasionally one or more pixels can fail or become

incorrectly controlled.

In the past, there were a number of approaches for defining the permitted number

of pixel defects. However, these approaches were mostly very complicated and

varied from one manufacturer to the next. When handling warranty issues for all

of its display products, MEDION therefore adheres to the strict and transparent

requirements of the standard EN ISO 9241-307, Class II; which has been briefly

summarised below.

The EN ISO 9241-307 standard defines, amongst other things, the generally

applicable guidelines relating to pixel defects. Pixel defects are categorised into

four fault classes and three defect types. Every individual pixel consists of three sub-

pixels, each of which is assigned a basic colour (red, green, blue).

Pixel structure

5 Pixel

Sub-Pixel

red

Rows

Pixel

blue

green

Table of Contents