to configure the VPN and remote access functions.
8.2 Settings
Click VPN and Remote Access Setup to open the setup page.
Remote Access Control
PPP General Setup
IKE/IPSec General Setup
Remote User Profiles
(Teleworkers)
VPN and Remote Access Setup
Allows you to enable each type of VPN service or
disable it for VPN pass-through purpose. For example,
you can enable IPSec and L2TP VPN service on your
router and disable PPTP VPN service if you intend
running a PPTP server inside your LAN. Further, you
also can enable or disable the ISDN remote access
including remote dial-in and LAN-to-LAN access.
To configure your router's PPP authentication method
as well as IP assignment range for remote dial-in user.
This submenu only applies to PPP-related VPN
connections, such as PPTP, L2TP, L2TP over IPSec,
and ISDN-based remote access.
To configure a common Pre-shared key and security
method for remote dial-in user or node (LAN-to-LAN)
which uses dynamic IP address.
To create dial-in user accounts. Vigor router supports
three types of dial-in methods, PPTP, L2TP, and L2TP
over IPSec and ISDN. The PPTP VPN connection is
compatible with all Windows platforms which have
8-2