SIP Port
The port number used to send/receive SIP message for building a
session. The default value is 5060 and this must match with the peer
Registrar when making VoIP calls.
Registrar
Enter the domain name (or IP address) of your registered SIP Registrar
server.
Proxy
You can enter domain name or IP address of SIP proxy server. If this
setting value is the same as Registrar, please press "Duplicate".
Domain/Realm
You can enter domain name or IP address of SIP URL. e.g., if SIP URL is
sip:63065@fwd.pulver.com, then this field contains fwd.pulver.com. If
this setting value is the same as Registrar, please press "Duplicate".
Stun Server
This setting defines whether the Vigor2200V/VG NAT traversal
mechanism is enabled (by checking checkbox) or not. If activated,
please also specify IP address of STUN server. Under this mode, VoIP
communication from Vigor2200V/VG can pass through with the specified
STUN server behind firewall/NAT.
VoIP Setup
9-8