Table of Contents
Advertisement
o When the oven switches on, the oven in use symbol (2) will
appear on the LED display, as well as the automatic cooking
symbol.
o At the end of the cooking time, an audible signal will sound and
the automatic cooking symbol will flash on the LED display.
o To reset the oven and cancel the audible alarm, press the
programme button until the oven in use symbol appears on the
LED display and the automatic cooking symbol goes out.
o IMPORTANT: If you have not turned the main oven function
selector knob and main oven thermostat control knob to their
OFF positions, when you reset the oven it will continue to heat.
Cancelling the semi-automatic and automatic function
o Press and hold down the minus (5) and plus (7) button
simultaneously, until the automatic cooking symbol (1) goes out
and the oven in use symbol (2) is lit.
o IMPORTANT: If you have not turned the main oven function
selector knob and main oven thermostat control knob to their
OFF positions, when you reset the timer function, it will continue
to heat.
Cancelling the minute minder function
o Press and hold down the programme button (6) until the
decimal point starts to flash to enter programming mode.
o Press and hold down the minus (5) and plus (7) buttons
simultaneously.
o The minute minder symbol (4) will go out.
o IMPORTANT: If you have not turned the main oven function
selector knob and main oven thermostat control knob to their
OFF positions, when you reset the timer function, it will continue
to heat.
Adjusting the volume of the audible signal
The volume of the audible signal has 3 levels, low, medium and high.
To adjust the volume, you should proceed as follows:-
o IMPORTANT: The oven timer/programmer must not be in any
form of countdown mode and the oven in use symbol (2) must
be lit.
16
Advertisement
Table of Contents
