LG T2108VSPM8 Owner's Manual page 20

Process
When you need a Wash+Rinse+Spin, Spin
only, Rinse+Spin, Rinse only, Wash+Rinse,
Wash only cycle, these can be set manually.
• Press the Process button to select Wash,
Rinse and Spin options as desired.
1
Press the POWER button.
2
Press the Process button until light up.
• When you select a programme, the LED in
front of each option is light up.
3
Press the Water Level button to adjust the
water level according to the amount of laundry.
4
Add laundry into the drum.
5
Press the START/PAUSE button to start the
cycle(s).
6
Add the detergent into the detergent dispenser
and close the door.
NOTE
• When you set a washing cycle manually such as
rinse only, wash only or wash and rinse, the
water will not be drained out after the wash is
completed. If you wish to drain the water, select
a spin only cycle after the wash has completed.
• If a rinse only cycle is selected, the water supply
is started after detecting the load and this cycle
will start. However this cycle will start to supply
water of the selected water level if there is
already water in the tub.
• If you do not select or change the Water Level,
the water level will be set automatically.
20
Child Lock
Use this function to disable the controls. This
function can prevent children from changing
programmes or operating this appliance.
NOTE
• Once this function is set, all buttons are locked
except the POWER button.
• When the controls are locked,
remaining time are alternatively shown on the
display during the wash while the child lock is
engaged.
• Turning off the power will not reset this
function. You must deactivate this function
before you can access any other options and
functions.
Locking the Control Panel
1
Turn on the power.
2
Press and hold the Water Level and Program
buttons simultaneously for 3 seconds to
activate this function.
Unlocking the Control Panel
1
Turn on the power.
2
Press and hold the Water Level and Program
buttons simultaneously for 3 seconds to
deactivate this function.
• When this function is deactivated, a beeper
will sound and the remaining time for the
current cycle will reappear on the display.
EN
CL
and the