Table of Contents
Advertisement
FUNCTION
Presentation Timer
Language
Projector Position
Auto Power Off
Blank Timer
Panel Key Lock
Timer Controller
Splash Screen
Quick Cooling
Audio Settings
Standby Monitor Out
Menu Settings
Lamp Settings
DESCRIPTION
Reminds the presenter to finish the presentation within a certain time
frame. See
"Setting the presentation timer" on page 31
Sets the language for the On-Screen Display (OSD) menus. See
the menus" on page 22
for details.
See
"Choosing a location" on page 11
Allows the projector to turn off automatically if no input signal is
detected and no operation is made by user after a set period of time. See
"Setting Auto Power Off" on page 48
Sets the image blank time when the Blank feature is activated, once
elapsed the image will return to the screen. See
page 32
for details.
Disables or enables all panel key functions except
projector and keys on the remote control. See
on page 32
for details.
Sets the auto-shutdown timer. The timer can be set to a value between
30 minutes and 12 hours.
Allows you to select which logo screen will be displayed during
projector start-up. Three options are available: MITSUBISHI logo,
Black screen, or Blue screen.
Selecting On enables the function and the projector cooling time will be
shortened to a few seconds.
If you attempt to restart the projector right after the quick cooling
process, it may not be turned on successfully and will rerun its
cooling fans.
See
"Adjusting the sound" on page 32
Selecting On enables the function. The projector can output a VGA
signal when it is in standby mode and the COMPUTER-1 and
MONITOR OUT jacks are correctly connected to devices. See
"Connecting a monitor" on page 17
connection.
•Enabling this function slightly increases the standby power
consumption.
•When the projector enters standby mode, the Video will be
interrupted briefly. This is not a product malfunction.
Menu display time
Sets the length of time the OSD will remain active after your last key
press. The range is from 5 to 30 seconds in 5-second increments.
Menu position
Sets the On-Screen Display (OSD) menu position.
Lamp mode
See
"Setting Lamp mode as Low" on page 48
Reset lamp timer
See
"Resetting the lamp timer" on page 51
Equivalent lamp hour
See
"Getting to know the lamp hour" on page 48
the total lamp hour is calculated.
for details.
"Using
for details.
for details.
"Hiding the image" on
I
I
POWER on the
"Locking control keys"
for details.
for how to make the
for details.
for details.
for details on how
EN-45
Advertisement
Table of Contents
