Mitsubishi Electric EX321U-ST User Manual page 40

Hide thumbs Also See for EX321U-ST:
Table of Contents

Advertisement

INF2?
INF0?
CLSS?
The PJLink "INPT?" will be replied only when the source is displayed on screen. When there is no signal, only
"Unavailable Time!" will be answered.
The above-mentioned control may not be performed correctly or the monitoring data may not be obtained correctly in the
following conditions:
During standby
During input source switching
During command processing
During AUTO execution
Before the splash screen disappears after the power is turned on.
Use 1 computer to control/monitor 1 projector.
For how to control/monitor using PJLink™, see the operation manual of the PJLink™ application you use.
When you monitor the projector's operating state using this function by issuing inquiry commands successively, issue an
inquiry command after receiving the response to the previous inquiry command from the projector.
How to Use Network Function
When connecting a computer and projector with LAN, configure the both IP Addresses in the same network
group.
Configure the IP CONFIG correctly. If the settings are not correct, the communication may be unavailable. For
the detail, consult the network administrator.
When the Control By in the SYSTEM SETUP: Advanced > LAN Control Settings menu is selected RS-232C, the
LAN Control Settings function is not available.
Glossary
For more detail of the glossary below, refer to the technical book that is commercially available.
Term
DHCP
IP Address
Subnet Mask
Default Gateway
MAC Address
EN-40
Inquiry about the model name
Inquiry about other information
Inquiry about the class information
Description
Abbreviation for Dynamic Host Confi guration Protocol. This protocol
automatically assigns IP Address to networked devices.
Numerical address to identify networked computers.
A numeric value to defi ne the number of bits used for a network
address of a divided network (or subnet) in an IP Address.
A server (or router) to communicate across networks (subnets) that
are divided by Subnet Mask.
Abbreviation for Media Access Control Address. MAC Address is a
unique ID number assigned to each network adapter. And this is
based on which data are sent and received between network adapt-
ers.
"EX321U-ST" or "EW331U-ST" is returned.
No other information is available. No parameter is returned.
"1" is returned.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ew331u-st

Table of Contents