Install And Charge The Battery - VTech CS6858-33 User Manual

3. Plug the telephone line cord (or DSL
filter) into the wall jack. Align the
holes on the back of the telephone
base with the standard wall plate.
Slide the bracket down until it clicks
securely in place. Connect the power
adapter to the telephone base and
an electrical outlet not controlled by
a wall switch.
4. Slide the telephone base down until
it clicks securely in place. Bundle
the telephone line cord and power
adapter cord neatly with twist ties if
necessary.

Install and charge the battery

Install the battery as shown below.
NOTES
• Use only supplied battery.
• If the handset will not be used for a long
time, disconnect and remove the battery
to prevent possible leakage.
7