Dacor Preference PF36BNDF Use And Care Manual page 4

I
mportant
Installer: Please leave this guide with this appliance.
Consumer: Please read and keep this Use & Care Manual for
future reference. This guide provides proper use and maintenance
information. Keep this guide and the sales receipt and/or
cancelled check in a safe place for future reference. Proof of
original purchase date is needed for warranty service.
If you have any questions, call:
Dacor Customer Service Team
1-800-793-0093 (U.S.A. and Canada)
Monday — Friday 6:00 to 5:00
am
Web site: www.Dacor.com
Have complete model and serial number identification of your
refrigerator ready. These numbers are found on a serial plate,
located on the right side of the refrigerator liner. Record these
numbers on this page for easy access.
e
lectronIc
The control center is located at the top front of the fresh food compartment.
I t
nItIal emperature
Temperatures are preset at 37°F (3°C) in the fresh food
compartment and 0°F (-18°C) in the freezer compartment. The
display will show the average compartment temperatures, based
on several measurement points within the compartment.
Note:
Temperatures displayed may vary from set point due to door
openings or during defrost. Thermometers placed in the refrig-
erator may record a temperature slightly above or below the
displayed temperature. This is normal as the displayed temper-
ature is an average.
t a
emperature djuStmentS
• Allow the temperature to stabilize for 24 hours after loading the
refrigerator before making any temperature adjustments.
• The first touch of the up or down arrow shows the current
temperature set point.
• Subsequent touches of the
point or the pad lowers the temperature set point.
• The display will show the new set point for approximately three
seconds, then return to the actual temperature currently within
that compartment.
• Limit temperature changes to one degree at a time. Allow the
new temperatures to stabilize for 24 hours before making a new
temperature adjustment.
I
nformatIon
Pacific Time
pm
c
ontrol
S
ettIngS
pad raise the temperature set
Model Number ________________________________________
Serial Number ________________________________________
Date of Purchase______________________________________
For service and warranty information, see page 18.
In our continuing effort to improve the quality and performance
of our appliances, it may be necessary to make changes to the
appliance without revising this guide.
c
enter
f I
aSt ce
When activated, Fast Ice reduces the freezer
temperature to the optimum setting for 24 hours in
order to produce more ice.
Note:
When the Fast Ice feature is in operation, the
the freezer control will not operate.
r f
eSet Ilter
When a water filter has been installed in the refrig-
erator, the yellow Alert light will illuminate when
90 percent of the volume of water for which the filter is rated has
passed through the filter OR 11 months have elapsed since the
filter has been installed.
The red Change light will illuminate when the rated volume of
water has passed through the filter OR 12 months have elapsed
since the filter was installed. A new filter should be installed
immediately when the Change light is illuminated.
After replacing the filter, press and hold the Reset Filter pad for
three seconds. The Alert and Change lights will go off.
2
and pads for