Table of Contents
Advertisement
Connections
Connecting to a TV
Make one of the following connections, depending on
the capabilities of your existing equipment.
ips
Depending on your TV and other equipment you wish
to connect, there are various ways you could connect
the unit. Use one of the connections described
below.
Please refer to the manuals of your TV, VCR, Stereo
System or other devices as necessary to make the
best connections.
Caution
– Make sure the unit is connected directly to the TV.
Select the correct AV input on your TV.
– Do not connect your unit to TV via your VCR. The
DVD image could be distorted by the copy protection
system.
Video connection
Connect the MONITOR OUT jack from the unit to the
VIDEO IN jack on the TV using the video cable supplied
(V).
S-Video connection
Connect the S-VIDEO OUT jack on the unit to the S-
VIDEO IN jack on the TV using the S-Video cable (S).
Component Video (Color Stream
Connect the COMPONENT VIDEO OUT/ PROGRES-
SIVE SCAN jacks from the unit to the corresponding in
jacks on the TV using an Y Pb Pr cable (C).
Progressive Scan (ColorStream
If your television is a high-definition or "digital ready"
television, you may take advantage of the unit's pro-
gressive scan output for the highest video resolution
possible.
If your TV does not accept the Progressive Scan for-
mat, the picture will appear scrambled if you try
Progressive Scan on the unit.
Connect the COMPONENT VIDEO OUT/ PROGRES-
SIVE SCAN jacks from the unit to the corresponding in
jacks on the TV using an optional Y Pb Pr cable (C).
ote
– Set the Progressive to "On" on the Setup menu for
progressive signal, see page 22.
®
) connection
®
pro) connection
C
V
VIDEO
COMPONENT VIDEO /
S-VIDEO
IN
PROGRESSIVE SCAN INPUT
IN
Pr
Y
Pb
L
Rear of TV
S
11
Advertisement
Table of Contents
