Connections; Fitting The System Connection Cables - LG LF-D5933 Owner's Manual

Connections

Fitting the system connection cables

• Your unit consists of two separate parts, Cassette tape player/DVD/VCD/CD player and an integrated Tuner/
Amplifier.
• Before you can use your unit, the separate parts must be connected with the supplied system connection cables.
• Make sure that all connections are made with your unit unplugged from the mains supply.
Cassette tape player/
DVD/VCD/CD player
Tuner/ Amplifier
Stack the parts of your unit in the order shown
1 1
above.
Position your unit so that you have easy access to
the rear of it.
Connect the SYSTEM JACK1 on the Cassette
2 2
tape player/DVD/VCD/ CD player to the SYSTEM
JACK1 connector on the Tuner/ Amplifier.
Connect the SYSTEM JACK2 connector on the
3 3
Cassette tape player/DVD/VCD/CD player to the
SYSTEM JACK2 connector on the tuner/ Amplifier.
Connect the LUG cable to the LUG connector
4 4
on the unit with the supplied hand screw.
10
otes
The system connection cables will only connect and should
'click' into place, do not try to force them.
If you need to unplug the system connection cables,
squeeze both sides of each plug before pulling it out - this
will 'unlock' the plug and allow it to be released.