Table of Contents
Advertisement
Installation
Attaching the Stand
― Before assembling the product, place the product down on a flat and stable surface so that the screen is facing downwards.
: The product is curved. Placing pressure on the product when on a flat surface may damage the product. When the product is on the ground facing up or down, do not put pressure on it.
Caution
Hold the stand neck with both hands,
not one hand, to prevent it from falling
off and causing injury.
1
Assemble the COVER-REAR TOP to the
stand neck as shown in the figure.
1
Place the stand neck on the monitor as
Fasten the screws at the top of the stand
shown in the figure.
neck.
1 6
Rotate the COVER-REAR TOP clockwise.
Stand up the monitor as shown in the
figure.
1
1
Insert the stand base into the stand neck
in the direction as shown in the figure.
1 7
1 8
Remove the package.
1
Disassemble the COVER-REAR TOP.
18
Advertisement
Table of Contents
