Installation - Hama TS37F Operating Instructions Manual

4. Getting started
• Open the battery compartment (1) and insert two AAA batteries with
the correct polarity.
• The battery compartment additionally contains the channel switch (2),
which allows you to switch between the channels CH1, CH2 and CH3.
Set the channel switch to the desired channel.
• Then close the battery compartment cover.
Replacing the batteries
• Open the battery compartment (1), remove and properly dispose of
the dead batteries and insert two new AAA batteries with the correct
polarity. Then close the battery compartment cover.
Note
Before use, make sure that you insert the batteries in the measuring
station rst and then in the base station.

5. Installation

Note – Installation
• We recommend initially placing the base and measuring stations in
the intended locations without installing them and making all the
settings described in 6. Operation.
• Only install the stations once the appropriate settings have been
made and a stable wireless connection is established.
5