Table of Contents
Advertisement
Before using for the first time
en
KBefore using for the first
time
Before you can use your new appliance, you must
t h e f i r s t t i m e
B e f o r e u s i n g f o r
make some settings.
Initial use
After connecting the appliance to the power or following
a power cut, the settings for initial use are shown on the
display. It may take a few seconds for the instruction to
appear.
You can change these settings at any time in the
Note:
basic settings. ~ "Basic settings" on page 15
Selecting the language
Turn the rotary selector to set the required language.
1.
Press the
s
field to confirm.
2.
The next setting appears.
Setting the time
Set the time using the rotary selector.
1.
Press the
s
field to confirm.
2.
A note appears in the display confirming that the initial
use has been completed.
Cleaning accessories
Before using the accessories for the first time, clean
them thoroughly using hot, soapy water and a soft cloth.
10
1Operating the appliance
You have already learnt about the controls and how
p l i a n c e
O p e r a t i n g t h e a p
they work. Now we will explain how to set your
appliance. You will learn about what happens when you
switch the appliance on and off, and how to select the
operating mode.
Switching the appliance on and off
Before you are able to set the appliance, you must
switch it on.
The timer can also be set when the appliance is
Note:
switched off. Some displays and notes remain visible in
the display after the appliance has been switched off.
Switch off your device when it is not being used. If no
settings are applied for a long time, the appliance
switches itself off automatically.
Switching on the appliance
Press the on/off button
All touch fields light up red. The Bosch logo appears in
the display, followed by the maximum microwave
output.
The appliance is ready to use.
The
field lights up red.
s
You can find out how to set the operating modes in the
individual chapters.
Switching off the appliance
Press the on/off button
Any functions that may be running are cancelled.
The time appears on the display.
You can set whether or not the time should be
Note:
displayed when the appliance is switched off in the
basic settings.
Operation
Some operating steps are the same for all operating
modes. In the following, you can learn about the basic
operating steps.
Starting the operation
You must press the start/stop button
operation.
After the operation starts, your settings are shown in the
display. The display ring is also displayed, which shows
the cooking time counting down.
If the operation is paused due to the appliance
Note:
door being opened, the operation must be restarted
using the start/stop button
closed.
to switch on the appliance.
ÿ
to switch off the appliance.
ÿ
to start each
l
after the door has been
l
Advertisement
Table of Contents
