Table of Contents
Advertisement
•
Press and hold the SET and the LIGHT keys for three seconds to turn the unit on/off/
•
Press the
key to view the temperature
•
To adjust the temperature, press and hold the SET key for 3 seconds. When the display shows
St, you can raise the temperature by pressing the LIGHT key or lower it by pressing the MENU
ADJUST key, shown below. Press the
temperature set-point will be saved automatically.
Door Open Alarm:
Your unit will sound an alarm when the door is open for longer than 60 seconds. To disable this:
1. Follow the Setting Parameters instructions on page 8.
2. Find parameter do2.
3. The default for the unit is set at 1 (Enabled).
4. To disable the alarm, set the parameter to 0 (Disabled).
5. Press the
key, or press no key for 30 seconds, to exit. The temperature set-point will be
saved automatically.
Low Temperature Alarm:
To set a low temperature alarm:
1. Follow the Setting Parameters instructions on page 8.
2. Find parameter A5.
3. Use the Use the
4. Press the
key, or press no key for 30 seconds, to exit. The temperature set-point will be
saved automatically.
High Temperature Alarm:
To set a high temperature alarm:
5. Follow the Setting Parameters instructions on page 8.
6. Find parameter A6.
7. Use the Use the
8. Press the
key, or press no key for 30 seconds, to exit. The temperature set-point will be
saved automatically.
and
keys to adjust the temperature.
and
keys to adjust the temperature.
key, or press no key for 30 seconds, to exit. The
8
Advertisement
Table of Contents
