Table of Contents
Advertisement
PC/AV Mode
Set
PC/AV Mode
to AV. The picture size will be enlarged.
This option is useful when you view a movie.
Set to
PC
when connected to a PC.
Set to
AV
when connected to an AV device.
This function does not support
Analog
mode.
Supplied for the wide models only such as 16:9 or 16:10.
If the monitor is in
HDMI
mode and the screen says
activates, press the JOG button to display the function-button screen and then select the
can select
PC
or AV.
Source Detection
Select either
Auto
or
Manual
as the method to recognize input signal.
Check Signal Cable
or power saving mode
icon. You
Key Repeat Time
Control the response rate of a button when the button is pressed.
Acceleration,
1
sec, or
2 sec
can be selected. If
when a button is pressed.
Power LED On
Con gure the settings to enable or disable the power LED located at the lower part of the product.
Working: The power LED is on when the product is turned on.
Stand-by: The power LED is on when the product is turned off.
Reset All
Return all the settings for the product to the default factory settings.
No Repeat
is selected, a command responds only once
35
Advertisement
Table of Contents
