LG LBC20514 Owner's Manual page 15

2. Removing and Installing The Freezer Handle
NOTE: Before beginning, check the handle type of your model.
Handle Type 1
Remove the cap (1) and two screws (2) with a flat head
screwdriver.
Loosen the two screws (3), remove the handle (4) and
install all on the right side.
Attach the cap and the two screws (that were previously
removed) on the left side (5).
Handle Type 2
It is not necessary to remove this type of handle.
3. Removing the refrigerator Door
Gently remove the top hinge cover with a flat head screwdriver (1).
Using the 10mm open-end wrench, remove the 3 bolts and raise the top hinge and place aside (2).
Remove the pivot (3) and the cap (4), place them in the oppsite side (the cap will be placed in the right side and the
pivot on the left side).
Slightly raise the refrigerator door (5) and remove it.
Once the door has been taken off, remove the screws (6), the bolt (7) and the pivot (8) located below this and remove
the hinge (9).
Install the hinge (10) on the opposite side of the door, replacing the screws (11), the bolt (12) and the pivot (13).
Take off the washer (14).
Using the ¼ inch hex socket wrench loosen the pin (15) and remove.
Remove the 4 screws (16 and 17) and the hinge (18).
13
12
REFRIGERATOR INSTALLATION
1
2
3
10
11
Handle Type 1
3
4
4
5
18
Handle Type 2
1
2
5
9
14
15
16
18
8
7
6
17