LG LBC20514 Owner's Manual page 11

2. Installing the Refrigerator Door
Remove the cover (1) using a flat head screwdriver (this requires a little force), loosen the 2 screws (2) and place on the
opposite side.
Place the hinge (3) on the opposite side and install the 4 screws (4 and 5).
Insert the pin (6) in the hinge (3).
Remove the cover (7) and install on the right side.
Place the door and line up with the pin holes (8), making sure that both parts are aligned.
Place the top hinge (9) and insert the 3 screws (10).
Position the cover of the hinge over this (11).
Check that the door has been installed correctly.
2
8
HOW TO REMOVE THE DOOR HANDLES
NOTE: The appearance of the handle may appear different.
3. Removing the Refrigerator Handle
• Loosen the fixation screws (1) with a 3/32 Allen wrench and
remove the handle (2).
• Remove the assembly screws (3) with a ¼ Allen wrench.
• Carefully remove the plug buttons from the door (4).The
buttons can be unscrewed using your fingers, turning
counter-clockwise. Continue turning until the screw is
loose and falls out.
• Install the buttons (4) on the left side.
4. Replacing the Refrigerator Handles
• Rotate handle upside down (1).
• Insert the assembly screws on the opposite side of the
door (2).
•
Hold the handle in place with the holes lined up with the
screw holes (3) and tighten the screws(4) in place with
the 3/32 Allen wrench.
REFRIGERATOR INSTALLATION
4
5
3
1
6
11
10
9
Fixation
Screws
Allen
Wrench
1
14
7
3
Assembly
Screws
2
1
4
2
3
4
4