Refrigerator Doors: How To Remove And Reverse - LG LBC20514 Owner's Manual

REFRIGERATOR DOORS: HOW TO REMOVE AND REVERSE (OPTIONAL) For Models with
Pull-out Drawer
You may find it more convenient to have the doors converted from the left-opening type (factory installed) to the
right-opening type. Directions refer to the right side as your right when facing the unit.
Hex Socket Wrench
Other necessary tools are:
1/4 inch socket wrench
•
• Adjustable wrench
IMPORTANT: Before you begin, unplug the refrigerator or disconnect the power source. Remove all food and any
adjustable doors or bins from the refrigerator doors.
HOW TO REVERSE DOOR SWING (When converting from left-opening mode to right-opening mode )
(when converting from the left-opening type to right-
opening type)
1. Removing Refrigerator Door
Gently pry the Top Hinge Cover with a flat head screwdriver and remove (1).
•
•
Using 10mm spcket wrench, remove the 3 bolts and lift off the Top Hinge. Set parts aside (2).
•
Remove the pivot (3) and the cap (4) and place them in the opposite side.
•
Gently lift the refrigerator door (5) a little and remove.
Once the door has been removed, remove the screws (6), the stopper (7) Hinge Pin (8) located below this and remove
•
the hinge (9).
Install the hinge (10) on the opposite side of the door replace the screws (11), the stopper (12) and Hinge Pin (13).
Using the ¼ inch socket wrench, loosen the pin (14) and remove it.
Remove the 4 screws (15 and 16) and remove the hinge (17).
13
12
REFRIGERATOR INSTALLATION
10 mm
1/4 in
3/8 in
Phillips Screwdriver
10mm open-end wrench
•
• Flat 2-inch putty knife
1
2
3
10
11
T O O L S N E E D E D
Flat Head Screwdriver
4
5
13
1/4 in
3/32 in
Allen Wrench
8
7
9
6
14
16
15
17