Restore The Configuration Settings - NETGEAR EX7500-100UKS User Manual

Nighthawk X4S AC2200 Tri-Band WiFi Range Extender

Restore the Configuration Settings

You can restore the configuration settings of the extender to a previously saved configuration file.
To restore the extender configuration settings:
1. Launch a web browser from a computer or mobile device that is connected to your extender network.
2. Log in to your extender:
• If you did not enable the One WiFi Name feature, enter www.mywifiext.net in the address field of
the browser.
• If you enabled the One WiFi Name feature, enter one of the following URLs:
- Windows-based computers. http://mywifiext
- Mac computers and iOS devices. http://mywifiext.local
- Android devices. http://<extender's IP address> (for example, http://192.168.1.3)
For more information about how to find your extender's IP address, see
Address on page 46.
A login page displays.
3. Enter your admin user name and password and click the LOG IN button.
The Status page displays.
4.
If your browser displays the Menu icon
The extender menu displays.
5. Select Settings > Other.
The Other Settings page displays.
6. Click the BROWSE button.
7. Locate and select the previously saved backup file.
The backup file uses a
CAUTION:
8. Click the RESTORE button.
A confirmation pop-up window opens.
9. Confirm your decision.
The extender configuration is restored and the extender restarts. This process takes about one minute.
, click it.
extension.
.cfg
After you click the RESTORE button, do not try to go online, turn off the
extender, shut down the computer, or do anything else to the extender
until it finishes restarting.
Maintain and Monitor the Extender
36
Find the Extender's IP