Run Smart Setup Installation - NETGEAR EX7500-100UKS User Manual

Run Smart Setup Installation

You can use Smart Setup to change the extender settings. This is an easy way to connect the extender to
a different router or to change the extender WiFi network name (SSID) or WiFi password.
To run Smart Setup:
1. Launch a web browser from a computer or mobile device that is connected to your extender network.
2. Log in to your extender:
• If you did not enable the One WiFi Name feature, enter www.mywifiext.net in the address field of
the browser.
• If you enabled the One WiFi Name feature, enter one of the following URLs:
- Windows-based computers. http://mywifiext
- Mac computers and iOS devices. http://mywifiext.local
- Android devices. http://<extender's IP address> (for example, http://192.168.1.3)
For more information about how to find your extender's IP address, see
Address
A login page displays.
3. Enter your admin user name and password and click the LOG IN button.
The Status page displays.
4. Click the SMART SETUP button.
5. Follow the prompts.
Nighthawk X4S AC2200 Tri-Band WiFi Range Extender
on page 46.
Get Started
15
Find the Extender's IP