Setting The Clock - LG MCV904P Quick Start Manual

LGEPS_MCV904P_ENG_3937.qxd

Setting the Clock

1. Press for at least 2 seconds
2. Choose from either AM 12:00 (for an am and pm
display) or 0:00 (for a 24 hour display).
3. Confirm your selection
4. Select the hours
5. Press
6. Select the minutes
7. Press
Use your player as an alarm clock
1 Press and hold TIMER. Each function, EX) TUNER, CD.... flashes.
2 Press SET when the function you want to be woken by is showing. If you
choose TUNER, "PLAY" and Then "REC" flashes in the display window
alternately.
3 Choose one of them by pressing SET.
4 "ON TIME" will be displayed. Then you can set the time you want the alarm to
go on. Press .bb / BB> to change the hours and minutes and SET to
save.
5 "OFF TIME" will be displayed. Then, you can set the time you want the
function to stop. Press .bb / BB> to change the hours and minutes
and press SET to save.
6 You will be shown the volume (VOL) you want to be woken by. Use
.bb / BB> to change the volume and SET to save. Switch the system
off. The clock icon " "shows that the alarm is set.
7 When the system is turned off, you can check the time the alarm is set for by
pressing TIMER. You can also turn the alarm on and off by pressing TIMER.
12
4/20/09 1:54 PM Page 12
ON UNIT
CLOCK
.bb / BB>
SET
.bb / BB>
SET
.bb / BB>
SET
Fall asleep while listening to your player
1 Press SLEEP repeatedly to select delay time between 10 and 180 minutes,
after the unit will be turned off.
2 To check the remaining time, press SLEEP.
DEMO
1 Press LG EQ/DEMO in power off state to demonstrate the function on display
window.
2 To cancel it, press 1 1 /] ] or this button again.
DIMMER
Press SLEEP once. The LED (Light-emitting diode) of front panel is turned off
and the display window will be darken by half. To cancel it, press SLEEP
repeatly until dim off.