ViewSonic CDE3204 User Manual page 35

Hospitality Menu
User can turn on the menu to lock the setting to prevent adjusting. The fixed
setting can also be stored and copied to another same display.
1. Press MENU and 9, 9, 3 button on the remote controller to display the Hospitality
menu.
2. Press or , then
Function, then press
submenu ( > > ), press
3. Press MENU to return to the previous menu or press EXIT to exit the menu.
Hosptitality Menu
EEPROM Init DO
Save Config To USB >>
Load Config From USB
>>
Hospitality
On
Hospitality Function
>>
Power On Mode
Off
Hosptitality Menu
Remote Control Code
Menu Key Enable
Remote Control Enable
Power On Volume 30
Max Volume 100
AV Enable
VOL Max 100
Compoent Enable
AV Enable
HDMI1 Enable
YPbPr Enable
Enable
HDMI2
HDMI1 Enable
DVI Enable
HDMI2 Enable
PC Enable
HDMI3 Enable
USB Enable
Enable
PC
Power Input AV
USB Enable
Power Input
to turn On/Off the Hospitality mode. Go next to Hospitality
for detail setting. When selecting a menu item with a
or OK to enter its submenu.
Menu item
0
EEPROM Init
Save Config To
USB
Load Config From
USB
Hospitality
Hospitality
Function
Power ON Mode
Menu item
0
Remote Customer
Code
Menu Key
Remote Control
Power On Volume
Max Volume
AV
AV
Compoent
HDMI1/2
DVI
PC
USB
Power Input
24
Description
Clean up the setting to its initial value.
Save the hospitality configuration into USB
drive.
Load the hospitality configuration from USB
drive.
Turn on or off the Hospitality function.
Enter the hospitality sub-menu.
Décider comment allumer l'écran de coupure
de courant AC.
Description
Select the specific remote ID (0, 1, or 2). (For
specific model only)
Enable or disable the MENU key.
Enable, disable remote or set as IR pass
through
Set the default volume for each power-on
Set the limitation of maximum volume
Enable or disable the input source.
Default input source for each power on.